JL-711A series light controller products are intelligent rotary lock light controllers developed based on ZHAGA BOOK18 interface standard, which can output 0~10V dimming signals. All models have built-in photosensitive sensors. The light controller is suitable for lighting scenes such as roads, lawns, courtyards, and parks.
Product size
Product Features
DC power supply, low power consumption
ZHAGA BOOK18 interface standard
Small size, suitable for installation in most lamps
0~10V dimming interface
Interference lighting filtering
Lamp reflected light compensation
IP66
Model | JL-711A1 | JL-711A2 |
Power Supply | Rated voltage：12~24VDC Rated current：10mA | |
Power Consumption | 12V/5mA；24V/6mA | |
Sensor Type | Photosensitive tube | |
Spectral Acquisition Range | 350~1100nm，Peak wavelength 550nm | |
Dimming interface | Type：0~10V Accuracy：±2% Drive current：20mA（Typical） | |
Turn on Illuminance | 50Lux（±10） | |
Turn off Illuminance | Reflected light + 40Lux（±10）after each turn on Lower limit：50+40Lux（±10） Upper limit：6000Lux（±100） | |
Reflected light compensation upper limit | 6000Lux（±100） | |
Initialization | After power on, the light is turned on by default and maintains 5S, then automatically turns off the light and enters the auto-sensing operation mode *1 | |
Turn on delay | 5s | |
Turn off delay | 20s | |
0%~100%；100%~0% Brightness change time | 8s | |
Midnight Dimming | NC | Trigger: the average center point of the first ten days (The first day default call night base is 10 hours) Dimming Ratio:50% Duration Ratio:40% Less than 10 days is calculated based on the actual number of days |
Energy saving strategy | NC | Factory Preset |
Mechanical Vibration | IEC60068-2-6 | |
Flammability Level | UL94-V0 | |
Operating Temperature | -40℃~70℃ | |
Storage Temperature | -40℃~85℃ | |
Operating Humidity | 5%RH~99%RH | |
IP Level | IP66 | |
Certifications |  | |
